KAWASAKI H1 500 H2 750 KH500 FUEL/GAS TAP PETCOCK GASKET/SEAL REBUILD KIT

Description

PLEASE READ CAREFULLY!
This is a gasket kit, not the complete petcock. This kit uses better than OEM upgraded parts made from Viton, the most fuel proof rubber available.
Don’t waste your money on a crappy
aftermarket petcock or
reproduction
rebuild kit that will be leaking in a year.  You
can replace the seal in your OEM petcock with a replacement part made from Viton, the most fuel resistant rubber available and have it perform like new
again.
It will included:
1 Packing(4 hole) Gasket
1 Bowl Gasket
1 Mounting Joint/Base Gasket
2 Stainless Steel Allen head replacement screws
This kit is for the gaskets only.  No other Petcock parts are included.  Does not include any diaphragm parts.
1)
Packing gasket goes behind the lever face.
2)Bowl
gasket goes between the screen and the bowl. The key to a successful
installation on this gasket is not to over tighten. No more than 1/2
turn after firm contact is all you need.
3)
Base/Joint gasket goes inside the coupling nut and seals between the petcock and tank outlet.
4)
Allen Head Screws mount the lever retainer plate.  They can be used or use your old ones.